Wood CalculatorMeasure, plan & work with wood

Wood calculators / Firewood & heating

Measure the wood. State the basis.

Wood Pellets vs Oil Cost Calculator

Compare entered pellet and oil prices per useful kWh, keeping each fuel’s quantity unit explicit.

Your wood & project inputs

MJ/kg
%
MJ/L
%

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Useful-heat unit cost = price per unit fuel / (energy per unit fuel × compatible efficiency).

Compare entered pellet and oil prices per useful kWh, keeping each fuel’s quantity unit explicit.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Prices and heating values are illustrative inputs, not current quotes. Capital, maintenance and delivery costs are excluded.

Wood Pellets vs Oil Cost: formula, units and interpretation

Compare entered pellet and oil prices per useful kWh, keeping each fuel’s quantity unit explicit. Prices and heating values are illustrative inputs, not current quotes. Capital, maintenance and delivery costs are excluded.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Wood Pellets vs Oil Cost Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Pellet price per metric tonne = 300 ; Pellet stated heating value = 17 MJ/kg; Pellet useful-heat efficiency = 80 %; Oil price per litre = 1 ; Oil stated heating value = 36 MJ/L; Oil useful-heat efficiency = 85 %; Currency label = USD.

OutputComputed result
Pellet useful-heat unit cost0.079412 USD/useful kWh
Oil useful-heat unit cost0.117647 USD/useful kWh
Pellet minus oil-0.038235 USD/useful kWh

How the stated input changes the result

ScenarioChanged input / basisResult
150 Pellet price per metric tonne0.039706 USD/useful kWh
225 Pellet price per metric tonne0.059559 USD/useful kWh
300 Pellet price per metric tonne0.079412 USD/useful kWh
375 Pellet price per metric tonne0.099265 USD/useful kWh
450 Pellet price per metric tonne0.119118 USD/useful kWh
600 Pellet price per metric tonne0.158824 USD/useful kWh

Unchanged inputs use: Pellet price per metric tonne = 300 ; Pellet stated heating value = 17 MJ/kg; Pellet useful-heat efficiency = 80 %; Oil price per litre = 1 ; Oil stated heating value = 36 MJ/L; Oil useful-heat efficiency = 85 %; Currency label = USD. Results retain the model limitations described above.

Common questions

Is a tonne the same as a US short ton?

No. The pellet price here is per 1000 kg metric tonne.

Does a litre of oil compare directly with a kilogram of pellets?

No. Their heating values and efficiencies must be included.

Does the cheaper fuel imply the cheaper heating system?

Not necessarily. Installed cost and other operating costs are outside this comparison.

How do I use this wood pellets vs oil cost calculator?

Compare entered pellet and oil prices per useful kWh, keeping each fuel’s quantity unit explicit. Useful-heat unit cost = price per unit fuel / (energy per unit fuel × compatible efficiency). Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • US Department of Energy: Full Text Glossary, combustion efficiency and heat-transfer efficiency definitionshttps://www.energy.gov/cmei/fuels/full-text-glossary
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9