Wood CalculatorMeasure, plan & work with wood

Wood calculators / Firewood & heating

Measure the wood. State the basis.

Firewood Cord Calculator

Measure a ranked firewood stack in cords, stacked cubic feet and stacked cubic metres.

Your wood & project inputs

m
m
m

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Stacked cords = ranked stack volume(ft³)/128.

Measure a ranked firewood stack in cords, stacked cubic feet and stacked cubic metres.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

A cord includes air space in the stack. Face cord, truck load, loose-thrown volume and solid wood are not interchangeable without measurements.

Firewood Cord: formula, units and interpretation

Measure a ranked firewood stack in cords, stacked cubic feet and stacked cubic metres. A cord includes air space in the stack. Face cord, truck load, loose-thrown volume and solid wood are not interchangeable without measurements.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Firewood Cord Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Dimension units = Metric (m / mm); Ranked stack length = 2.4384 m; Actual stack depth / stick length = 1.2192 m; Ranked stack height = 1.2192 m.

OutputComputed result
Stacked firewood volume1 cords
Stacked volume3.624556 m³
Stacked cubic feet128 ft³

How the stated input changes the result

ScenarioChanged input / basisResult
1.2192 mRanked stack length0.5 cords
1.8288 mRanked stack length0.75 cords
2.4384 mRanked stack length1 cords
3.048 mRanked stack length1.25 cords
3.6576 mRanked stack length1.5 cords
4.8768 mRanked stack length2 cords

Unchanged inputs use: Dimension units = Metric (m / mm); Ranked stack length = 2.4384 m; Actual stack depth / stick length = 1.2192 m; Ranked stack height = 1.2192 m. Results retain the model limitations described above.

Common questions

What is a full cord?

It occupies 128 stacked cubic feet. The familiar 4×4×8 ft stack is one arrangement with that volume.

Is a face cord always one-third of a cord?

No. It depends on actual stick length and stack dimensions; the trade name alone is insufficient.

Can I convert cords to weight automatically?

No. Solid fraction, species, moisture and density are also required.

How do I use this firewood cord calculator?

Measure a ranked firewood stack in cords, stacked cubic feet and stacked cubic metres. Stacked cords = ranked stack volume(ft³)/128. Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • NIST / NCWM, Avoid Getting Burned When Buying Firewood: cord measurementhttps://www.nist.gov/document/ncwm-firewood-factspdf
  • Measurement Canada: measuring bulk firewoodhttps://ised-isde.canada.ca/site/measurement-canada/en/infographics/measuring-bulk-firewood
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9