Wood calculators / Firewood & heating
Measure the wood. State the basis.
Firewood Useful Heat Calculator
Evaluate useful fuel heat using a supplied heating value and a compatible efficiency basis.
Your wood & project inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Useful heat(kWh) = mass × heating value(MJ/kg) × efficiency /3.6.
Evaluate useful fuel heat using a supplied heating value and a compatible efficiency basis.
- Confirm the physical, product or tally basis and use the stated units.
- Enter actual measurements and justified properties, prices or project allowances.
- Submit the form, then interpret the result with the assumptions and limits below.
The illustrative heating value is not a guaranteed wood-species value. Do not mix HHV and LHV efficiency bases or infer safe stove settings.
Firewood Useful Heat: formula, units and interpretation
Evaluate useful fuel heat using a supplied heating value and a compatible efficiency basis. The illustrative heating value is not a guaranteed wood-species value. Do not mix HHV and LHV efficiency bases or infer safe stove settings.
Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.
Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.
Continue with: Firewood Cord Calculator · Solid Wood to Cords Calculator · Firewood Cost Calculator · Wood Stove Heat Demand Scenario Calculator
Check the numbers
Firewood Useful Heat Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.
Worked example with stated inputs
Stated fuel mass = 100 kg; Fuel heating value on stated basis = 16 MJ/kg; Chosen heat-delivery efficiency = 70 %.
| Output | Computed result |
|---|---|
| Useful heat at supplied fuel inputs | 311.111111 kWh useful |
| Useful heat | 1,061,555.174711 BTU |
| Efficiency entered | 70 % |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 50 kg | Stated fuel mass | 155.555556 kWh useful |
| 75 kg | Stated fuel mass | 233.333333 kWh useful |
| 100 kg | Stated fuel mass | 311.111111 kWh useful |
| 125 kg | Stated fuel mass | 388.888889 kWh useful |
| 150 kg | Stated fuel mass | 466.666667 kWh useful |
| 200 kg | Stated fuel mass | 622.222222 kWh useful |
Unchanged inputs use: Stated fuel mass = 100 kg; Fuel heating value on stated basis = 16 MJ/kg; Chosen heat-delivery efficiency = 70 %. Results retain the model limitations described above.
Common questions
Does the calculation account for moisture automatically?
No. The heating value must already describe the fuel condition and stated energy basis.
Are HHV and LHV interchangeable?
No. Use a heating value and efficiency defined on compatible bases.
Does useful heat size a stove?
No. Appliance selection and installation require the appropriate heat-load and product assessment.
How do I use this firewood useful heat calculator?
Evaluate useful fuel heat using a supplied heating value and a compatible efficiency basis. Useful heat(kWh) = mass × heating value(MJ/kg) × efficiency /3.6. Read the dimensioned examples below before entering project values.
Do starting values represent product or code recommendations?
No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.
Can I export the result to Excel?
After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.
Where do the formulas and data come from?
Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- US Department of Energy: Full Text Glossary, combustion efficiency and heat-transfer efficiency definitionshttps://www.energy.gov/cmei/fuels/full-text-glossary
- US Department of Energy: Home Heating, efficiency and proper sizing; wood/pellet-stove installation instructionshttps://www.energy.gov/sites/default/files/2014/01/f6/homeHeating.pdf
- NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9