Wood CalculatorMeasure, plan & work with wood

Wood calculators / Board feet & lumber

Measure the wood. State the basis.

Board Foot Calculator

Calculate geometric board feet, solid cubic volume and an optional entered-price lumber total.

Your wood & project inputs

mm
mm
m
pieces

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

BF = thickness(in) × width(in) × length(ft) / 12; total BF = piece BF × quantity.

Calculate geometric board feet, solid cubic volume and an optional entered-price lumber total.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Actual measured volume and nominal billing tally can differ. This tool uses the dimensions you enter and does not automatically choose a merchant’s billing convention.

Board Foot: formula, units and interpretation

Calculate geometric board feet, solid cubic volume and an optional entered-price lumber total. Actual measured volume and nominal billing tally can differ. This tool uses the dimensions you enter and does not automatically choose a merchant’s billing convention.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Board Foot Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Quantity = 1 pieces; Optional lumber price = 0 ; Price basis = Per board foot (BF); Currency label = USD.

OutputComputed result
Total geometric board feet4 BF
Single-piece board feet4 BF
Total board feet4 BF
Total thousand board feet0.004 MBF
Solid volume0.009439 m³
Solid volume in cubic feet0.333333 ft³
Geometric board-foot equivalent4 BF

How the stated input changes the result

ScenarioChanged input / basisResult
76.2 mmWidth2 BF
114.3 mmWidth3 BF
152.4 mmWidth4 BF
190.5 mmWidth5 BF
228.6 mmWidth6 BF
304.8 mmWidth8 BF

Unchanged inputs use: Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Quantity = 1 pieces; Optional lumber price = 0 ; Price basis = Per board foot (BF); Currency label = USD. Results retain the model limitations described above.

Common questions

What is one board foot?

It is a geometric volume of 144 cubic inches, or one-twelfth of a cubic foot. A one-inch-thick, one-foot-wide, one-foot-long piece has one geometric board foot.

Should I enter nominal or actual lumber dimensions?

Use the basis required for your purpose and disclose it. Actual finished dimensions estimate physical volume; a supplier may bill using a nominal board-measure convention.

Is MBF one million board feet?

Here MBF means one thousand board feet, as used in the cited forestry source. Confirm the notation on an actual quotation.

Does this estimate lumber recovery from a log?

No. A log-rule board-foot estimate includes different yield assumptions. Use the separate scaling-rule tools.

How do I use this board foot calculator?

Calculate geometric board feet, solid cubic volume and an optional entered-price lumber total. BF = thickness(in) × width(in) × length(ft) / 12; total BF = piece BF × quantity. Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Can board feet describe foam insulation?

As a geometric volume unit, yes, if the entered dimensions describe the material. That does not predict installed spray-foam yield, R-value, coverage loss or thermal performance.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • Penn State Extension, Valuing Standing Timber: board feet and MBFhttps://extension.psu.edu/valuing-standing-timber
  • NIST PS 20-25 American Softwood Lumber Standard, section 2.16 and Table 3 (printed page 15)https://www.nist.gov/system/files/documents/2024/12/11/PS%2020-25%20Final.pdf
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9