Wood calculators / Workshop geometry
Measure the wood. State the basis.
Wood Miter Angle Calculator
Calculate equal flat miters for a regular polygon frame.
Your wood & project inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
For equal flat regular-polygon joints, symmetric miter setting = 180° / number of sides.
Calculate equal flat miters for a regular polygon frame.
- Confirm the physical, product or tally basis and use the stated units.
- Enter actual measurements and justified properties, prices or project allowances.
- Submit the form, then interpret the result with the assumptions and limits below.
No compound bevel, spring angle or manufacturer-specific saw scale convention.
Wood Miter Angle: formula, units and interpretation
Calculate equal flat miters for a regular polygon frame. No compound bevel, spring angle or manufacturer-specific saw scale convention.
Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.
Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.
Continue with: Wood Stair Geometry Calculator · Wood Right Triangle Cut Angle Calculator · Wood CNC Feed Calculator · Wood Chip Load Calculator
Check the numbers
Wood Miter Angle Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.
Worked example with stated inputs
Equal regular polygon sides = 6 sides.
| Output | Computed result |
|---|---|
| Symmetric polygon miter setting | 30 degrees |
| Interior included angle | 120 degrees |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 3 sides | Equal regular polygon sides | 60 degrees |
| 4 sides | Equal regular polygon sides | 45 degrees |
| 6 sides | Equal regular polygon sides | 30 degrees |
| 8 sides | Equal regular polygon sides | 22.5 degrees |
| 9 sides | Equal regular polygon sides | 20 degrees |
| 12 sides | Equal regular polygon sides | 15 degrees |
Unchanged inputs use: Equal regular polygon sides = 6 sides. Results retain the model limitations described above.
Common questions
Is this the polygon interior angle?
No. The interior angle is 180−360/n; the symmetric miter setting is 180/n.
Does this work for an irregular frame?
Not without the actual joint geometry; equal-side regular polygons are assumed.
Is compound crown molding covered?
No. Compound miter/bevel settings require additional geometry.
How do I use this wood miter angle calculator?
Calculate equal flat miters for a regular polygon frame. For equal flat regular-polygon joints, symmetric miter setting = 180° / number of sides. Read the dimensioned examples below before entering project values.
Do starting values represent product or code recommendations?
No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.
Can I export the result to Excel?
After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.
Where do the formulas and data come from?
Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- DEWALT DWS715 Instruction Manual: Cutting Trim Molding and Other Frames (Fig. P), regular-polygon miter equationhttps://assets.dewalt.com/GLOBALBOM/QU/DWS715/20/Instruction_Manual/EN/N743681_DWS715.pdf
- NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9