Wood CalculatorMeasure, plan & work with wood

Wood calculators / Firewood & heating

Measure the wood. State the basis.

Wood Fuel Required Calculator

Calculate fuel mass for a given useful heat demand, operating time and compatible energy inputs.

Your wood & project inputs

kW
h
MJ/kg
%

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Fuel mass = useful kW × hours × 3.6 / (fuel MJ/kg × efficiency fraction).

Calculate fuel mass for a given useful heat demand, operating time and compatible energy inputs.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

No stove firing schedule, emissions estimate, moisture correction or unattended-operation recommendation.

Wood Fuel Required: formula, units and interpretation

Calculate fuel mass for a given useful heat demand, operating time and compatible energy inputs. No stove firing schedule, emissions estimate, moisture correction or unattended-operation recommendation.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Wood Fuel Required Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Required useful heat rate = 5 kW; Heating duration = 8 h; Stated fuel heating value = 16 MJ/kg; Stated heat-delivery efficiency = 70 %.

OutputComputed result
Fuel mass for stated useful heat12.857143 kg fuel
Mass in pounds28.345148 lb
Useful heat supplied40 kWh

How the stated input changes the result

ScenarioChanged input / basisResult
2.5 kWRequired useful heat rate6.428571 kg fuel
3.75 kWRequired useful heat rate9.642857 kg fuel
5 kWRequired useful heat rate12.857143 kg fuel
6.25 kWRequired useful heat rate16.071429 kg fuel
7.5 kWRequired useful heat rate19.285714 kg fuel
10 kWRequired useful heat rate25.714286 kg fuel

Unchanged inputs use: Required useful heat rate = 5 kW; Heating duration = 8 h; Stated fuel heating value = 16 MJ/kg; Stated heat-delivery efficiency = 70 %. Results retain the model limitations described above.

Common questions

Does the useful heat rate equal appliance fuel input?

No. Useful output is after the stated losses represented by efficiency.

Can I use this for wood pellets?

Yes only with appropriate pellet energy and efficiency inputs on a compatible basis.

Does it predict seasonal weather demand?

No. The load and hours are supplied by the visitor.

How do I use this wood fuel required calculator?

Calculate fuel mass for a given useful heat demand, operating time and compatible energy inputs. Fuel mass = useful kW × hours × 3.6 / (fuel MJ/kg × efficiency fraction). Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • US Department of Energy: Full Text Glossary, combustion efficiency and heat-transfer efficiency definitionshttps://www.energy.gov/cmei/fuels/full-text-glossary
  • US Department of Energy: Home Heating, efficiency and proper sizing; wood/pellet-stove installation instructionshttps://www.energy.gov/sites/default/files/2014/01/f6/homeHeating.pdf
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9