Wood CalculatorMeasure, plan & work with wood

Wood calculators / Volume, mass & moisture

Measure the wood. State the basis.

Wood Moisture Mass Calculator

Estimate total mass at a supplied dry-basis moisture level while conserving oven-dry wood substance.

Your wood & project inputs

kg
%

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Mass at MC = oven-dry wood mass × (1 + MC/100).

Estimate total mass at a supplied dry-basis moisture level while conserving oven-dry wood substance.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Volume is not assumed constant, so this does not provide a universal green-density multiplier.

Wood Moisture Mass: formula, units and interpretation

Estimate total mass at a supplied dry-basis moisture level while conserving oven-dry wood substance. Volume is not assumed constant, so this does not provide a universal green-density multiplier.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Wood Moisture Mass Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Conserved oven-dry wood mass = 10 kg; Chosen dry-basis moisture content = 20 %.

OutputComputed result
Mass at supplied dry-basis moisture12 kg
Oven-dry mass10 kg
Water mass2 kg

How the stated input changes the result

ScenarioChanged input / basisResult
5 kgConserved oven-dry wood mass6 kg
7.5 kgConserved oven-dry wood mass9 kg
10 kgConserved oven-dry wood mass12 kg
12.5 kgConserved oven-dry wood mass15 kg
15 kgConserved oven-dry wood mass18 kg
20 kgConserved oven-dry wood mass24 kg

Unchanged inputs use: Conserved oven-dry wood mass = 10 kg; Chosen dry-basis moisture content = 20 %. Results retain the model limitations described above.

Common questions

Does the volume remain fixed?

No assumption about volume or shrinkage is made; this is mass balance only.

Can I infer preservative retention?

No. Added chemicals and other mass changes require separate data.

How do I get the dry wood mass?

Use a suitable measured value or an independently justified estimate; this tool does not choose a drying method.

How do I use this wood moisture mass calculator?

Estimate total mass at a supplied dry-basis moisture level while conserving oven-dry wood substance. Mass at MC = oven-dry wood mass × (1 + MC/100). Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • USDA Wood Handbook, FPL-GTR-282, Chapter 13: moisture content and dimensional change, equation 13-3https://research.fs.usda.gov/download/treesearch/62261.pdf
  • USDA FPL-GTR-76: Specific Gravity, Moisture Content, and Density Relationship for Woodhttps://www.fpl.fs.usda.gov/documnts/fplgtr/fplgtr76.pdf