Wood calculators / Volume, mass & moisture
Measure the wood. State the basis.
Timber Volume Calculator
Calculate cubic metres, cubic feet and geometric board-foot equivalents for rectangular timber.
Your wood & project inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Solid rectangular volume = thickness × width × length × quantity.
Calculate cubic metres, cubic feet and geometric board-foot equivalents for rectangular timber.
- Confirm the physical, product or tally basis and use the stated units.
- Enter actual measurements and justified properties, prices or project allowances.
- Submit the form, then interpret the result with the assumptions and limits below.
No bark, cavities, curved edges, moisture movement or sawmill yield is inferred.
Timber Volume: formula, units and interpretation
Calculate cubic metres, cubic feet and geometric board-foot equivalents for rectangular timber. No bark, cavities, curved edges, moisture movement or sawmill yield is inferred.
Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.
Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.
Continue with: Wood Weight Calculator · Pine Wood Weight Calculator · Balsa Wood Weight Calculator · Pressure-Treated Lumber Weight Calculator
Check the numbers
Timber Volume Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.
Worked example with stated inputs
Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Quantity = 1 pieces.
| Output | Computed result |
|---|---|
| Total rectangular solid volume | 0.009439 m³ |
| Solid volume | 0.009439 m³ |
| Solid volume in cubic feet | 0.333333 ft³ |
| Geometric board-foot equivalent | 4 BF |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 76.2 mm | Width | 0.004719 m³ |
| 114.3 mm | Width | 0.007079 m³ |
| 152.4 mm | Width | 0.009439 m³ |
| 190.5 mm | Width | 0.011799 m³ |
| 228.6 mm | Width | 0.014158 m³ |
| 304.8 mm | Width | 0.018878 m³ |
Unchanged inputs use: Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Quantity = 1 pieces. Results retain the model limitations described above.
Common questions
Is CFT a cubic-foot unit?
In many timber quotations CFT means cubic feet. Confirm it is a solid geometric volume and not another trade tally.
Can I calculate wooden runner CFT?
For a rectangular runner, enter its actual width, thickness and length.
Does cubic volume determine species weight?
No. Mass also requires a bulk density at the matching moisture condition.
How do I use this timber volume calculator?
Calculate cubic metres, cubic feet and geometric board-foot equivalents for rectangular timber. Solid rectangular volume = thickness × width × length × quantity. Read the dimensioned examples below before entering project values.
Do starting values represent product or code recommendations?
No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.
Can I export the result to Excel?
After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.
Where do the formulas and data come from?
Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- Penn State Extension, Valuing Standing Timber: board feet and MBFhttps://extension.psu.edu/valuing-standing-timber