Wood calculators / Volume, mass & moisture
Measure the wood. State the basis.
Balsa Wood Weight Calculator
Estimate balsa wood weight from stated physical dimensions and moisture-matched density.
Your wood & project inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Mass = actual rectangular wood volume × bulk density; total mass = piece mass × quantity.
Estimate balsa wood weight from stated physical dimensions and moisture-matched density.
- Confirm the physical, product or tally basis and use the stated units.
- Enter actual measurements and justified properties, prices or project allowances.
- Submit the form, then interpret the result with the assumptions and limits below.
A theoretical mass for the entered geometry and density, not a shipping certificate, structural load rating or universal species weight. Coatings, hardware, voids and irregular geometry require separate treatment.
Balsa Wood Weight: formula, units and interpretation
Balsa — BALTEK SBC.100 example: A manufacturer nominal end-grain balsa sheet value, not the density of all hobby balsa or all BALTEK grades. The published SBC.100 sheet range is 136–176 kg/m³. Do not treat this as an assumed 12% MC species value. Basis: BALTEK SBC.100 nominal sheet density, ASTM C271 basis
Mass = actual rectangular wood volume × bulk density; total mass = piece mass × quantity. A theoretical mass for the entered geometry and density, not a shipping certificate, structural load rating or universal species weight. Coatings, hardware, voids and irregular geometry require separate treatment.
Use dimensions and density that describe the same piece and condition. A product reference is not a guarantee for every thickness, layup, adhesive content or natural specimen. Tables keep that same disclosed basis while varying the stated dimensions.
Continue with: Timber Volume Calculator · Wood Weight Calculator · Pine Wood Weight Calculator · Pressure-Treated Lumber Weight Calculator
Check the numbers
Balsa Wood Weight Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.
Worked example with stated inputs
Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Density reference = Balsa — BALTEK SBC.100 example; Bulk density at stated moisture = 148 kg/m³; Quantity = 1 pieces.
| Output | Computed result |
|---|---|
| Theoretical wood mass | 1.396964 kg |
| Mass in pounds | 3.079779 lb |
| Quantity | 1 pieces |
| Total mass | 1.396964 kg |
| Solid volume | 0.009439 m³ |
| Solid volume in cubic feet | 0.333333 ft³ |
| Geometric board-foot equivalent | 4 BF |
| Entered bulk density | 148 kg/m³ |
| Density reference | Balsa — BALTEK SBC.100 example |
| Reference basis; override may differ | BALTEK SBC.100 nominal sheet density, ASTM C271 basis |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 76.2 mm | Width | 0.698482 kg |
| 114.3 mm | Width | 1.047723 kg |
| 152.4 mm | Width | 1.396964 kg |
| 190.5 mm | Width | 1.746206 kg |
| 228.6 mm | Width | 2.095447 kg |
| 304.8 mm | Width | 2.793929 kg |
Unchanged inputs use: Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Density reference = Balsa — BALTEK SBC.100 example; Bulk density at stated moisture = 148 kg/m³; Quantity = 1 pieces. Results retain the model limitations described above.
Common questions
What density and moisture basis does this page use?
Balsa — BALTEK SBC.100 example: A manufacturer nominal end-grain balsa sheet value, not the density of all hobby balsa or all BALTEK grades. The published SBC.100 sheet range is 136–176 kg/m³. Do not treat this as an assumed 12% MC species value. Basis: BALTEK SBC.100 nominal sheet density, ASTM C271 basis
Can I use green or pressure-treated wood without a density measurement?
There is no universal value for these conditions. Species, water and preservative retention affect mass; enter a density that matches the actual condition.
Does a higher calculated weight mean a higher safe load?
No. This is self-mass arithmetic, not a strength or support-capacity calculation.
Are nominal sizes used automatically?
No. Physical volume uses the actual dimensions displayed in the form. Any nominal-size example is explicitly labelled.
How do I use this balsa wood weight calculator?
Estimate balsa wood weight from stated physical dimensions and moisture-matched density. Mass = actual rectangular wood volume × bulk density; total mass = piece mass × quantity. Read the dimensioned examples below before entering project values.
Do starting values represent product or code recommendations?
No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.
Can I export the result to Excel?
After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.
Where do the formulas and data come from?
Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- USDA Wood Handbook, Chapter 4: dry-basis moisture content and specific-gravity/density definitionshttps://research.fs.usda.gov/download/treesearch/37428.pdf
- 3A Composites, BALTEK SBC technical data sheet, nominal sheet density of SBC.100https://www.3accorematerials.com/uploads/pdf/TDS-BALTEK-SBC-E-07.2025.pdf