Wood CalculatorMeasure, plan & work with wood

Wood calculators / Volume, mass & moisture

Measure the wood. State the basis.

Wood Density Calculator

Calculate a measured wood bulk density from a mass and volume at a stated condition.

Your wood & project inputs

kg
m³

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Bulk density = measured mass / measured volume at the same condition.

Calculate a measured wood bulk density from a mass and volume at a stated condition.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Moisture, coatings, voids and measurement method affect the result; oven-dry substance density is a different basis.

Wood Density: formula, units and interpretation

Calculate a measured wood bulk density from a mass and volume at a stated condition. Moisture, coatings, voids and measurement method affect the result; oven-dry substance density is a different basis.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Wood Density Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Dimension units = Metric (m / mm); Measured mass = 5 kg; Measured volume = 0.01 m³.

OutputComputed result
Measured bulk density500 kg/m³
Density in pounds per cubic foot31.21398 lb/ft³

How the stated input changes the result

ScenarioChanged input / basisResult
2.5 kgMeasured mass250 kg/m³
3.75 kgMeasured mass375 kg/m³
5 kgMeasured mass500 kg/m³
6.25 kgMeasured mass625 kg/m³
7.5 kgMeasured mass750 kg/m³
10 kgMeasured mass1,000 kg/m³

Unchanged inputs use: Dimension units = Metric (m / mm); Measured mass = 5 kg; Measured volume = 0.01 m³. Results retain the model limitations described above.

Common questions

Should the wood be oven dry?

Only if oven-dry density is the intended basis. Otherwise record moisture and the mass/volume condition actually measured.

Can a species name determine an exact density?

No. Species references have natural variation and explicit moisture bases.

Can I combine a wet mass with a dry volume?

Only when deliberately reporting that mixed reference definition, not as an actual same-condition bulk density.

How do I use this wood density calculator?

Calculate a measured wood bulk density from a mass and volume at a stated condition. Bulk density = measured mass / measured volume at the same condition. Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • USDA Wood Handbook, Chapter 4: dry-basis moisture content and specific-gravity/density definitionshttps://research.fs.usda.gov/download/treesearch/37428.pdf
  • USDA FPL-GTR-76: Specific Gravity, Moisture Content, and Density Relationship for Woodhttps://www.fpl.fs.usda.gov/documnts/fplgtr/fplgtr76.pdf
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9