Wood CalculatorMeasure, plan & work with wood

Wood calculators / Board feet & lumber

Measure the wood. State the basis.

Lumber Price per Piece Calculator

Convert a per-thousand-board-foot quote into a cost scenario for dimensioned lumber pieces.

Your wood & project inputs

mm
mm
m
pieces

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Piece BF = dimensions in consistent units; cost = total geometric BF × quoted price/1000.

Convert a per-thousand-board-foot quote into a cost scenario for dimensioned lumber pieces.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

The entered dimensions determine the tally. Actual finished sizes do not automatically match nominal commercial billing.

Lumber Price per Piece: formula, units and interpretation

Convert a per-thousand-board-foot quote into a cost scenario for dimensioned lumber pieces. The entered dimensions determine the tally. Actual finished sizes do not automatically match nominal commercial billing.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Lumber Price per Piece Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Quantity = 1 pieces; Quoted price per MBF = 800 ; Quotation basis = Per thousand board feet; Currency label = USD.

OutputComputed result
Price per dimensioned piece3.2 USD
Single-piece board feet4 BF
Total board feet4 BF
Total thousand board feet0.004 MBF
Solid volume0.009439 m³
Solid volume in cubic feet0.333333 ft³
Geometric board-foot equivalent4 BF
Entered-price total3.2 USD

How the stated input changes the result

ScenarioChanged input / basisResult
76.2 mmWidth1.6 USD
114.3 mmWidth2.4 USD
152.4 mmWidth3.2 USD
190.5 mmWidth4 USD
228.6 mmWidth4.8 USD
304.8 mmWidth6.4 USD

Unchanged inputs use: Dimension units = Metric (m / mm); Thickness = 25.4 mm; Width = 152.4 mm; Length = 2.4384 m; Quantity = 1 pieces; Quoted price per MBF = 800 ; Quotation basis = Per thousand board feet; Currency label = USD. Results retain the model limitations described above.

Common questions

Can a two-by-four be billed from nominal dimensions?

A quotation may use a nominal tally even though physical finished dimensions are smaller. Confirm that basis before pricing.

Does per thousand mean per thousand pieces?

Not in this tool. It means 1000 board feet.

Does the total include freight?

No. This is the supplied material-price arithmetic only.

How do I use this lumber price per piece calculator?

Convert a per-thousand-board-foot quote into a cost scenario for dimensioned lumber pieces. Piece BF = dimensions in consistent units; cost = total geometric BF × quoted price/1000. Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • Penn State Extension, Valuing Standing Timber: board feet and MBFhttps://extension.psu.edu/valuing-standing-timber
  • NIST PS 20-25 American Softwood Lumber Standard, section 2.16 and Table 3 (printed page 15)https://www.nist.gov/system/files/documents/2024/12/11/PS%2020-25%20Final.pdf
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9