Wood CalculatorMeasure, plan & work with wood

Wood calculators / Board feet & lumber

Measure the wood. State the basis.

Lumber Board Foot Price Calculator

Calculate lumber cost from an entered board-foot quantity and a per-BF or per-MBF quotation.

Your wood & project inputs

BF

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Cost = BF × price per BF; if priced per MBF, divide the quoted price by 1000 first.

Calculate lumber cost from an entered board-foot quantity and a per-BF or per-MBF quotation.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

No supplier prices, taxes, delivery charges or timber tax basis are looked up.

Lumber Board Foot Price: formula, units and interpretation

Calculate lumber cost from an entered board-foot quantity and a per-BF or per-MBF quotation. No supplier prices, taxes, delivery charges or timber tax basis are looked up.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Lumber Board Foot Price Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Quoted lumber quantity = 250 BF; Quoted unit price = 5 ; Quoted price basis = Per board foot; Currency label = USD.

OutputComputed result
Entered-price lumber total1,250 USD
Effective price per board foot5 USD/BF
Entered quantity250 BF

How the stated input changes the result

ScenarioChanged input / basisResult
125 BFQuoted lumber quantity625 USD
187.5 BFQuoted lumber quantity937.5 USD
250 BFQuoted lumber quantity1,250 USD
312.5 BFQuoted lumber quantity1,562.5 USD
375 BFQuoted lumber quantity1,875 USD
500 BFQuoted lumber quantity2,500 USD

Unchanged inputs use: Quoted lumber quantity = 250 BF; Quoted unit price = 5 ; Quoted price basis = Per board foot; Currency label = USD. Results retain the model limitations described above.

Common questions

How do I convert a per-thousand lumber price?

Divide the quoted price per MBF by 1000 to obtain a price per BF, using the same tally basis.

Is this a local lumber price estimator?

It only evaluates the price you supply. Availability and current local quotes are not included.

Does a tree’s geometric volume equal billable BF?

No. Scaling rules, defects and contractual tally conventions can change the quoted quantity.

How do I use this lumber board foot price calculator?

Calculate lumber cost from an entered board-foot quantity and a per-BF or per-MBF quotation. Cost = BF × price per BF; if priced per MBF, divide the quoted price by 1000 first. Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • Penn State Extension, Valuing Standing Timber: board feet and MBFhttps://extension.psu.edu/valuing-standing-timber
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9