Wood CalculatorMeasure, plan & work with wood

Wood calculators / Surface materials & budgets

Measure the wood. State the basis.

Wood Chip Mulch Calculator

Calculate loose wood-chip or mulch volume in cubic metres and cubic yards for a rectangular surface.

Your wood & project inputs

m
m
mm
%

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Bulk material volume = area × chosen depth × (1 + entered extra allowance).

Calculate loose wood-chip or mulch volume in cubic metres and cubic yards for a rectangular surface.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Depth is user supplied. No playground-impact attenuation, settlement, fire performance or certified safety-surface assessment.

Wood Chip Mulch: formula, units and interpretation

Calculate loose wood-chip or mulch volume in cubic metres and cubic yards for a rectangular surface. Depth is user supplied. No playground-impact attenuation, settlement, fire performance or certified safety-surface assessment.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Wood Chip Mulch Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Dimension units = Metric (m / mm); Surface / room length = 5 m; Surface / room width = 4 m; Chosen spread depth = 75 mm; Chosen extra material allowance = 0 %.

OutputComputed result
Bulk volume at entered spread depth1.5 m³
Bulk cubic yards1.961926 yd³
Covered area20 m²

How the stated input changes the result

ScenarioChanged input / basisResult
2.5 mSurface / room length0.75 m³
3.75 mSurface / room length1.125 m³
5 mSurface / room length1.5 m³
6.25 mSurface / room length1.875 m³
7.5 mSurface / room length2.25 m³
10 mSurface / room length3 m³

Unchanged inputs use: Dimension units = Metric (m / mm); Surface / room length = 5 m; Surface / room width = 4 m; Chosen spread depth = 75 mm; Chosen extra material allowance = 0 %. Results retain the model limitations described above.

Common questions

Is the example depth a playground requirement?

No. Playground surfacing requires the applicable product and safety assessment.

Does it account for settlement?

Only through an explicit allowance you choose; no universal compaction factor is assumed.

Can I convert bulk volume to tonnes?

Only with an appropriate bulk density including the actual moisture and void conditions.

How do I use this wood chip mulch calculator?

Calculate loose wood-chip or mulch volume in cubic metres and cubic yards for a rectangular surface. Bulk material volume = area × chosen depth × (1 + entered extra allowance). Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
  • Lowe's: Wood Flooring Calculators, area and selected product coveragehttps://www.lowes.com/n/calculators/wood-flooring-calculator