Wood CalculatorMeasure, plan & work with wood

Wood calculators / Logs & standing timber

Measure the wood. State the basis.

Timber Value Scenario Calculator

Calculate a simple timber-sale budget using your volume, quote and explicit costs.

Your wood & project inputs

m³

Starting values are calculation examples. Verify actual dimensions, moisture basis, rates and model assumptions. Dimension-unit switching does not change fixed-unit price or engineering-property inputs.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Net entered-price scenario = stated volume(m³) × price per m³ − harvesting − hauling.

Calculate a simple timber-sale budget using your volume, quote and explicit costs.

  1. Confirm the physical, product or tally basis and use the stated units.
  2. Enter actual measurements and justified properties, prices or project allowances.
  3. Submit the form, then interpret the result with the assumptions and limits below.

No live stumpage prices, professional appraisal, taxes, cost basis, land value or investment forecast.

Timber Value Scenario: formula, units and interpretation

Calculate a simple timber-sale budget using your volume, quote and explicit costs. No live stumpage prices, professional appraisal, taxes, cost basis, land value or investment forecast.

Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.

Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.

Check the numbers

Timber Value Scenario Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.

Worked example with stated inputs

Dimension units = Metric (m / mm); Stated sale volume = 10 m³; Entered gross price per m³ = 100 ; Entered harvesting cost = 200 ; Entered hauling cost = 100 ; Currency label = USD.

OutputComputed result
Entered-price net timber scenario700 USD
Gross stated value1,000 USD
Entered volume10 m³

How the stated input changes the result

ScenarioChanged input / basisResult
5 m³Stated sale volume200 USD
7.5 m³Stated sale volume450 USD
10 m³Stated sale volume700 USD
12.5 m³Stated sale volume950 USD
15 m³Stated sale volume1,200 USD
20 m³Stated sale volume1,700 USD

Unchanged inputs use: Dimension units = Metric (m / mm); Stated sale volume = 10 m³; Entered gross price per m³ = 100 ; Entered harvesting cost = 200 ; Entered hauling cost = 100 ; Currency label = USD. Results retain the model limitations described above.

Common questions

Does this estimate timber tax basis?

No. Tax basis and tax liability depend on records and applicable rules and are not implemented.

Are local timber prices included?

No. All prices and costs are supplied by the visitor.

Can a board-foot quote be entered as price per m³?

No. Keep the quotation volume convention consistent; a log-rule yield is not a simple solid-volume conversion.

How do I use this timber value scenario calculator?

Calculate a simple timber-sale budget using your volume, quote and explicit costs. Net entered-price scenario = stated volume(m³) × price per m³ − harvesting − hauling. Read the dimensioned examples below before entering project values.

Do starting values represent product or code recommendations?

No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.

Can I export the result to Excel?

After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.

Where do the formulas and data come from?

Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • Penn State Extension, Valuing Standing Timber: board feet and MBFhttps://extension.psu.edu/valuing-standing-timber
  • NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9