Wood calculators / Fences & framing
Measure the wood. State the basis.
Wood Fence Cost Calculator
Estimate a straight-run fence picket, regular post and rail list using the stated infill convention.
Your wood & project inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Regular bays = ceil(net infill run/chosen bay); open-run posts = bays+1; pickets follow the explicitly selected face/gap or overlap pitch.
Estimate a straight-run fence picket, regular post and rail list using the stated infill convention.
- Confirm the physical, product or tally basis and use the stated units.
- Enter actual measurements and justified properties, prices or project allowances.
- Submit the form, then interpret the result with the assumptions and limits below.
Gate opening is removed from infill only. Gate posts, corners, ends, returns, stepped terrain, hardware, embedment and wind/support design require separate layout. Double layer means two equal counted layers, not every shadowbox arrangement.
Wood Fence Cost: formula, units and interpretation
Estimate a straight-run fence picket, regular post and rail list using the stated infill convention. Gate opening is removed from infill only. Gate posts, corners, ends, returns, stepped terrain, hardware, embedment and wind/support design require separate layout. Double layer means two equal counted layers, not every shadowbox arrangement.
Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.
Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.
Continue with: Wood Fence Material Calculator · Board on Board Fence Calculator · Wood Fence Post Count Calculator · Wood Fence Rail Count Calculator
Check the numbers
Wood Fence Cost Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.
Worked example with stated inputs
Dimension units = Metric (m / mm); Single straight overall fence run = 20 m; Opening width excluded from infill = 0 m; Chosen maximum regular bay = 2 m; Actual picket face width = 140 mm; Chosen edge-to-edge gap = 10 mm; Chosen board overlap = 20 mm; Rail rows per bay = 3 rows; Chosen extra material allowance = 10 %; Infill convention = One picket layer with gaps; Price per picket = 3 ; Price per post = 20 ; Price per bay rail piece = 8 ; Labor price per overall meter = 15 ; Other fixed charge = 0 ; Currency label = USD.
| Output | Computed result |
|---|---|
| Entered-price fence budget | 1,204 USD |
| Pickets with entered reserve | 148 pickets |
| Posts (straight run assumption) | 11 posts |
| Bay rail pieces | 30 pieces |
| Net infill run | 20 m |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 10 m | Single straight overall fence run | 612 USD |
| 15 m | Single straight overall fence run | 933 USD |
| 20 m | Single straight overall fence run | 1,204 USD |
| 25 m | Single straight overall fence run | 1,519 USD |
| 30 m | Single straight overall fence run | 1,796 USD |
| 40 m | Single straight overall fence run | 2,382 USD |
Unchanged inputs use: Dimension units = Metric (m / mm); Single straight overall fence run = 20 m; Opening width excluded from infill = 0 m; Chosen maximum regular bay = 2 m; Actual picket face width = 140 mm; Chosen edge-to-edge gap = 10 mm; Chosen board overlap = 20 mm; Rail rows per bay = 3 rows; Chosen extra material allowance = 10 %; Infill convention = One picket layer with gaps; Price per picket = 3 ; Price per post = 20 ; Price per bay rail piece = 8 ; Labor price per overall meter = 15 ; Other fixed charge = 0 ; Currency label = USD. Results retain the model limitations described above.
Common questions
Does board on board have a universal overlap?
No. Supply the intended overlap, smaller than the actual board width. This tool uses the stated single overlapping-layer convention.
Are gate posts included?
The regular open-run count is a baseline. The excluded opening does not automatically insert or engineer gate posts.
Does it size post foundations?
No. Soil, frost, wind, height and connection requirements are not calculated.
Are rail pieces the same as stock lengths?
Each counted piece spans one regular bay in this estimate. Cutting from purchased stock needs a separate cut plan.
How do I use this wood fence cost calculator?
Estimate a straight-run fence picket, regular post and rail list using the stated infill convention. Regular bays = ceil(net infill run/chosen bay); open-run posts = bays+1; pickets follow the explicitly selected face/gap or overlap pitch. Read the dimensioned examples below before entering project values.
Do starting values represent product or code recommendations?
No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.
Can I export the result to Excel?
After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.
Where do the formulas and data come from?
Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- Outdoor Essentials / Lowe's: Fence Calculator — Building with Pickets, quantity arithmetichttps://pdf.lowes.com/productdocuments/d27b01be-ea65-4de6-aa9c-7a485c4bab31/43237730.pdf
- NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9