Wood calculators / Panels & cutting
Measure the wood. State the basis.
Lumber Cut List Calculator
Generate a practical first-fit decreasing cut-list estimate for up to 200 straight pieces.
Your wood & project inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Sort requested lengths descending, place each in the first stock length that fits, including inter-piece kerfs and stated end trims.
Generate a practical first-fit decreasing cut-list estimate for up to 200 straight pieces.
- Confirm the physical, product or tally basis and use the stated units.
- Enter actual measurements and justified properties, prices or project allowances.
- Submit the form, then interpret the result with the assumptions and limits below.
A heuristic, not a guaranteed minimum-stock solution. Grain, defects, clamping, cut sequence and safe sawing practice require independent planning.
Lumber Cut List: formula, units and interpretation
Generate a practical first-fit decreasing cut-list estimate for up to 200 straight pieces. A heuristic, not a guaranteed minimum-stock solution. Grain, defects, clamping, cut sequence and safe sawing practice require independent planning.
Separate the measured physical quantity from the purchase or design convention. Nominal lumber names, finished dimensions, geometric board feet, log-rule yield, stacked cords and mass describe different things. The method on this page uses only the basis stated beside its inputs; do not replace a missing property with an unrelated unit or trade name.
Before using the answer for a real project, confirm measurements and the relevant supplier information. Entered waste, prices, material properties and limits remain user choices. A rounded purchasing count is a quantity allowance rather than a cutting plan, and a calculated physical response is not a building-code approval.
Continue with: Plywood Sheet Coverage Calculator · OSB Wall Sheathing Calculator · Plywood Roof Sheathing Calculator · OSB Roof Sheathing Calculator
Check the numbers
Lumber Cut List Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not stock recommendations, current quotes, code design values or full standards tables.
Worked example with stated inputs
Dimension units = Metric (m / mm); Stock length = 2400 mm; Trim at each stock end = 10 mm; Saw kerf = 3 mm; Cut list: length, quantity (one per line) = 600,4 450,4.
| Output | Computed result |
|---|---|
| First-fit decreasing cut plan | 2 stock lengths |
| Requested pieces | 8 pieces |
| Usable stock length | 2.38 m |
| Offcut length after kerfs | 0.542 m |
| Stock 1 cuts | 600 + 600 + 600 + 450 mm |
| Stock 2 cuts | 600 + 450 + 450 + 450 mm |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 2400 mm | Stock length | 2 stock lengths |
| 2640 mm | Stock length | 2 stock lengths |
| 3000 mm | Stock length | 2 stock lengths |
| 3600 mm | Stock length | 2 stock lengths |
| 4200 mm | Stock length | 2 stock lengths |
| 4800 mm | Stock length | 1 stock lengths |
Unchanged inputs use: Dimension units = Metric (m / mm); Stock length = 2400 mm; Trim at each stock end = 10 mm; Saw kerf = 3 mm; Cut list: length, quantity (one per line) = 600,4 450,4. Results retain the model limitations described above.
Common questions
Is this an optimal cutting algorithm?
No. It uses a disclosed first-fit decreasing heuristic and can use more stock than an exact solver.
How is kerf counted?
Between consecutive pieces in each stock length; end trim is removed separately at both ends.
Can I mix stock lengths?
No. This version uses one stated stock length per calculation.
Can I download a native Excel optimizer?
No. Results and input text can be exported as CSV.
How do I use this lumber cut list calculator?
Generate a practical first-fit decreasing cut-list estimate for up to 200 straight pieces. Sort requested lengths descending, place each in the first stock length that fits, including inter-piece kerfs and stated end trims. Read the dimensioned examples below before entering project values.
Do starting values represent product or code recommendations?
No. They are stated calculation examples. Verify actual dimensions, material or product properties, units and site conditions. Neither a positive result nor an example value establishes a certified product, allowed load, compliant layout or current market price.
Can I export the result to Excel?
After calculating, use Export CSV. Excel can open the numeric results and submitted inputs. This is a text export, not a native formula workbook, desktop app or downloadable design package.
Where do the formulas and data come from?
Method and material references are listed below as plain-text addresses. Dimensional tables are calculated here from the stated inputs. Product density examples retain their species, moisture or manufacturer basis. Sources are not fetched when you use the calculator.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- Google OR-Tools: bin-packing problem definition; this site uses its own disclosed heuristic, not the OR-Tools solverhttps://developers.google.com/optimization/pack/bin_packing
- NIST SP 811, Appendix B.9: mass, length, area and volume conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9